LED Rope Light - 150ft Roll
Rectification: Full wave (no flicker)
Rated life: 50,000 hours
Power Consumption: 0.8 amps per roll (96 watts)
Roll Length: 150 feet
Diameter: 13MM (1/2 inch)
Power Cord Length: 6 Feet
Cut in field every: 39.4 inches
LED spacing: approximately 1.3 inchMax length to connect to one power cord = 300 feet
Be sure to cut rope light on printed cut marks (scissors) or you will damage a complete circuit.
Avoid splicing together sections to make a long run. Rope light performs best when a continuous pieces is powered by 1 power cord and terminated with an end cap.
The words "Start" and "End" are printed at each cut marks on rope light. "Start" must ALWAYS be closest to the power cord to maintain correct polarity.
Power cord connections MUST be water tight. If your entire run of rope light goes out, replace the power cord.
DO NOT leave your rope light plugged in while on the spool as heat can not escape and you may damage the entire roll.