LED Rope Light - 75ft Roll
(Also available in 150' Rolls!)
Each of our 75 foot rolls includes three power cords, end caps and splices. Rated for up to 50,000 hour of use, our LED Rope Light is the highest quality you'll find.
Utilizing high-grade source clips, the LEDs in our rope light will maintain their brightness up to 30% longer than inferior products. Concave LED lenses eliminate spotlight effects and spread the light from each LED over more than 120 degrees.
- Rectification: Full wave (no flicker)
- Rated life: 50,000 hours
- Voltage: 120V
- Power Consumption: 0.8 amps per roll (96 watts)
- Roll Length: 75 feet
- Diameter: 13MM (1/2 inch)
- Power Cord Length: 6 Feet
- Cut in field every: 39.4 inches
- LED spacing: approximately 1.3 inch
- Max length to connect to one power cord = 300 feet
Be sure to cut rope light on printed cut marks (scissors) or you will damage a complete circuit. See video above for more details.
Avoid splicing together sections to make a long run. Rope light performs best when a continuous pieces is powered by 1 power cord and terminated with an end cap.
The words "Start" and "End" are printed at each cut marks on rope light. "Start" must ALWAYS be closest to the power cord to maintain correct polarity.
Power cord connections MUST be water tight. If your entire run of rope light goes out, replace the power cord.
DO NOT leave your rope light plugged in while on the spool as heat can not escape and you may damage the entire roll.